Please see description for package details.
DC motor: Rated Voltage: 3-6V DC Unloaded speed: 200 RPM Load current: 190 mA (250 mA MAX) maximum torque: 800 g. Cm min
Chassis: Dimensions: 7.72 in x 4.13 in x 0.12 in (19.6 cm x 10.5 cm x 0.3 cm) Weight: 14.29 oz (405 g)
Wheel: Width: 30mm Diameter: 65mm
Battery: 7.4V Li-ion Battery (Custom Made)Battery: 2*18650 batteriesChemistry: IMR Nominal Capacity: 3000mAh Nominal Voltage: 7.4V Rechargeable: Yes Dimensions: 7 cm x 4 cm x 2 cm
Charger:DC9V 1A AC/DC Adapter AC110V~240V Universal voltage AC110V~240V Stable output Low noise High current
This package is customized for Robo101! This is the version 2.0! This package includes all equipment needed for making Line Follower Robot, Obstacle Avoider Robot, Wall Follower Robot and doing some interesting Arduino Projects! This includes: 1. Arduino Uno R3 2. L298N (Red) 3. Breadboard (400 tie pins) 4. Sonar Sensor (Ultrasonic Sensor HC-SR04) x 2 5. Bluetooth Module Breakout (HC-05) 6. Robot Chassis (Acrylic) 7. DC geared motor x 2 8. Motor Supports x 2 9. Yellow Tire x 2 10. Directional Wheel 11. Rechargeable Li-ion Battery (2 Cells) with Charger 12. Male to Male Jumper wire x 20 13. Male to Female Jumper wire x 20 14. Screw Driver (Flat + Star) (May not be included, depends on manufacturer) 15. Nuts and Bolts 16. Led x 15 (R, G, Y) + RGB x 2 17. 10k Ohm Potentiometer x 1 18. LDR x 2 19. Resistor 220 Ohm x 10 NOTE: (for the battery unit) Please use the charger to charge up this unit. We are not liable if you damage this unit by wrong configuration/short circuit etc. This unit is custom made. So, this may not look like a finished product like any other branded product.
Arduino(Windows): https://www.arduino.cc/en/Guide/windows Getting Started: https://www.arduino.cc/en/Guide/HomePage
