(+88) 01322 908 240

RC522 RFID Card Reader/Detector

RC522 13.56 Mhz RFID Reader Module Kit
Availability :    2
৳219.9
Quantity :

RC522 RFID Card Reader/Detector  Specification


Working current: 13-26mA/ DC 3.3V
Standby current: 10-13mA/DC 3.3V
sleeping current: <80uA> peak current: <30mA> Working frequency: 13.56MHz
Card reading distance: 0-60mm (mifare1 card)
Protocol: SPI
data communication speed: Maximum 10Mbit/s
Card types supported: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire
Dimension: 40mm×60mm
Working temperature: -200C-800C
Storage temperature: -400C-850C
Humidity: relevant humidity 5%-95%
Max SPI speed: 10Mbit/s

Package Includes:
1 x RC522 board
1 x 13.56MHz Key tag
1 x 13.56MHz Card
1 x 8 ways straight header pin
1 x 8 ways right angle header pin
TThis RFID module is based on MFRC-522. This is used in highly integrated 13.56MHz contactless communication card chip to read and write, of NXP for “three” and the application launched a low voltage, low cost, small size, non-contact card chip to read and write, intelligent instruments and portable handheld devices developed better.
The MF RC522 use of advanced modulation and demodulation concept completely integrated into the 13.56MHz all kinds of passive contactless communication methods and protocols. 14443A compatible transponder signal. The digital part handles the the ISO14443A frames and error detection. In addition, support Quick CRYPTO1 encryption algorithm, the term verification MIFARE series. MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transfer rates up to 424kbit/s.
As 13.56MHz highly integrated card reader series chip new family, the MF RC522 MF RC500 MF RC530 there are many similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode, helps to reduce the connection, reduce PCB board volume and reduce costs.
MF522-AN module uses Philips MFRC522 original chip design circuit card reader, easy to use, low cost, suitable for equipment development, the development of advanced applications reader users, the need for RF card terminal design / production users. This module can be directly loaded into the variety of reader molds. Module uses voltage of 3.3V, simple few lines through the SPI interface directly with any user CPU board is connected to the communication module can guarantee stable and reliable work, reader distance.



Top